Pre-Stained Cedar Fences: Parks & Covenants
Planning a pre-stained, pre-built cedar privacy fence next to a Seattle park or on a covenant lot in Windermere or Norwood Village? Find the right line first, with the city, Parks and association rules cited.

A pre-stained, pre-built cedar privacy fence is a clean way to close in a yard. On some lots, the hard part isn't the fence. It's knowing exactly where it can go.
Two kinds of lots need extra care. The first is a lot that backs onto city park land, like many homes near the shoreline parks in Rainier Beach or the playfield in Bitter Lake. The second is a lot under deed covenants or an architectural committee, like Windermere in Seattle or Norwood Village in Bellevue.
This guide walks through how to plan the fence line on both, using the rules those cities, Seattle Parks and the associations publish.
Quick note: SeattleFence is an independent fence contractor. We aren't affiliated with Seattle Parks, the City of Bellevue, the Windermere Corporation or Norwood Village Association. Only they can decide what's allowed on your lot. For association questions, go to the architectural review committee and read your covenants.
On this page
- Why the line matters more than the panel
- Lots that back onto Seattle park land
- Covenant lots: Windermere, Seattle
- Covenant lots: Norwood Village, Bellevue
- City height and permit basics
- Why pre-stained, pre-built cedar fits these lots
- A checklist before you order
- Related pages
- Sources
Why the line matters more than the panel
A pre-built cedar fence is made to a set height and style before it reaches your yard. Once it's stained and hung, moving it is a full rebuild. So the questions to answer before you order are about placement:
- Where is the true property line?
- Is the land on the other side public park land, a neighbor's yard or an association common area?
- Do your covenants set a different setback than the city does?
- How tall can the fence be in each part of the yard?
Lots that back onto Seattle park land
Seattle Parks' Boundaries and Encroachments page says city park land includes developed parks, trails, greenspaces and streets designated as park boulevards. A private fence on park land is an encroachment. The page also warns that existing fences and landmarks may not mark the true boundary.
That matters in neighborhoods built around public parks:
- Rainier Beach. Be'er Sheva Park, Pritchard Island Beach and Rainier Beach Playfield are all Seattle Parks properties. See our Rainier Beach fence page.
- Bitter Lake. Bitter Lake Playfield sits next to the community center and includes a small section of the lake's shoreline. See our Bitter Lake fence page.
Don't build to the old fence. If your yard meets a park, don't assume the existing fence, hedge or path is the line. Confirm it before you set posts. The cedar fence should sit fully on your property.

Covenant lots: Windermere, Seattle
The Windermere Corporation describes itself as the community organization for the Windermere neighborhood on Lake Washington. Its public guidelines say:
- Fences follow city rules. Fences at the property line for privacy purposes are allowed under the same regulations as the City of Seattle.
- Front yard returns. In the front yard setback, the side fence may return to the house rather than extending out to the front property line.
- Height is the city's call. Height restrictions aren't specified in the Windermere covenants, deeds or restrictions, so City of Seattle height restrictions apply.
- Setbacks differ. The Corporation says almost all Windermere properties have different setbacks than the City of Seattle.
- Ask early. It asks owners to contact its Design, Land Use and Construction chair at least 45 days before a project to renovate or replace any structure or permanent fixture.
The public documents don't name fences in the board review list. Ask the Corporation whether your fence needs review, and read your Windermere Deed. Our Windermere Corporation fence guide collects what's public, and the Windermere neighborhood page covers the area.
Covenant lots: Norwood Village, Bellevue
Norwood Village Association's Architecture page quotes its Declaration: no building, fence or other structure may be erected, placed or altered until the plans, exact location and a completion time have been approved by the architectural control committee.
For fence or shed projects 5 feet or taller, its Submission Requirements page asks for:
- A project timeline
- Dimensions, plus a description of materials and paint color
- A parcel map showing adjacent properties, with the fence clearly marked
- A list of neighbors who will see the change
- A declaration of whether it's visible from a public road, right-of-way or HOA common area
Read our Norwood Village HOA fence guide and the Norwood Village neighborhood page.
Color is part of the request. Norwood Village asks for materials and paint color up front. With a pre-stained fence, you choose the stain before ordering, so you can put the exact color in your submission.
City height and permit basics
| Rule | Seattle (SDCI) | Bellevue (LUC 20.20.400) |
|---|---|---|
| Front setback | 4 ft in a front or street-side setback | 4 ft 6 in within a required front setback, with limited exceptions |
| General height | 6 ft in residential zones, plus 2 ft of arbors or trellises | No fence may violate sight obstruction restrictions at street intersections; confirm other limits for your address with the city |
| Permit trigger | No permit at 8 ft or less with no masonry or concrete over 6 ft, unless in a flood-prone area | A fence over 8 ft needs a Building Permit |
| Slopes and grade | Up to 8 ft on a sloping site if the average between posts is 6 ft | Height is measured from finished grade on the exterior side; a berm can't add height |
City permission and association approval are separate. Plan for both.
Why pre-stained, pre-built cedar fits these lots

None of the rules above require a particular build method. Still, a pre-stained, pre-built cedar privacy fence suits careful lots well:
- Decide everything up front. Height, style and stain color are set before the fence is built, so your site sketch, committee request and final fence all match.
- Even color. The cedar is stained before installation, so the boards are covered evenly and the fence goes in already protected.
- A consistent look on long runs. Pre-built sections share the same board spacing and trim along a park edge or rear line.
- Easy to describe. A single style and color is simple to put in a committee submission.
On steep or irregular lines, site-built cedar can follow the grade more closely. Our post on pre-stained cedar panels vs. site-built fences compares the two. See our cedar privacy fences, solid board and picture frame styles.
A checklist before you order
- Confirm the property line, especially along park land or a common area.
- Read your deed and covenants for setbacks that differ from the city's.
- Ask your committee (ARC/ACC) whether the fence needs review, and how far ahead.
- Check city height limits for the front setback and the rest of the yard.
- Pick the stain color and keep a sample or photo for your request.
- Get a written scope and site sketch you can attach to the submission.
Ready to plan your fence? We'll measure, sketch the line, and give you a written scope with the style and stain color you choose. Call (253) 766-5854 or request a free quote.
Related pages
- Windermere Corporation fence guide (Seattle)
- Fence installation in Windermere, Seattle
- Fence installation in Rainier Beach, Seattle
- Fence installation in Bitter Lake, Seattle
- Norwood Village HOA fence guide (Bellevue)
- Fence installation in Norwood Village, Bellevue
- Seattle and Bellevue service areas
Sources
- Seattle Parks: Boundaries and Encroachments
- Seattle Parks: Be'er Sheva Park, Pritchard Island Beach, Rainier Beach Playfield, Bitter Lake Playfield
- Seattle SDCI: Fences
- Windermere Corporation home page
- Windermere Corporation: Design, Land Use and Construction
- Windermere Corporation: Construction Approval Process and Guidelines, revised 2020 (PDF)
- Norwood Village Association: Architecture
- Norwood Village Association: Submission Requirements
- Bellevue Land Use Code 20.20.400, Fences