← Back to Seattle

Serving Seward Park, Seattle WA

Fence Installation in Seward Park, Seattle, WA

SeattleFence builds cedar privacy and open-style fences for homes in Seward Park, Seattle, near the city park on Lake Washington Boulevard South. We plan each fence around Seattle's permit and height rules, and around park boundaries where a lot meets public land.

Loading map...

About Seward Park

Seward Park, at 5900 Lake Washington Blvd. S, covers 300 acres within the Seattle city limits. Seattle Parks describes old-growth forest, eagles' nests, a 2.4-mile bike and walking path, an amphitheater, a native plant garden, an art studio, hiking trails, shoreline, and beaches.

The park's history page says the city bought Bailey Peninsula in 1911 and named it after William H. Seward. The Olmsted Brothers had included the peninsula in their 1903 plan for Seattle's parks. The 1917 lowering of Lake Washington for the Ship Canal exposed the grassy meadow that now leads to the swimming beach. The bathhouse was built in 1927, and a Greek-style amphitheater was built on the south hillside in 1953.

Seattle Parks lists Seward Park Beach, at the same address, among the city's lifeguarded freshwater swimming beaches on Lake Washington.

300-acre city park
Lifeguarded swimming beach
5900 Lake Washington Blvd. S

Fence rules at a glance

Seward Park lots follow the City of Seattle's fence rules. Here is what SDCI's fences page and Seattle Parks publish.

TopicRuleSource
When no permit is neededFence 8 ft or under, with no masonry or concrete over 6 ft, and not in a flood-prone areaSDCI Fences
Height in residential zones6 ft, plus 2 ft of arbors or trellises; 4 ft in a front or street-side setbackSDCI Fences
Sloping sitesUp to 8 ft if the average height between posts is 6 ftSDCI Fences
Fence on a retaining wall that raises gradeCombined height capped at 9 ft 6 in.SDCI Fences
Lots next to park landA private fence on city park land, including park boulevards, is an encroachment; existing fences may not mark the true lineParks boundaries

SDCI's Do You Need a Permit? page repeats the same exemption: fences less than 8 feet high with no concrete or masonry elements higher than 6 feet. Work near an environmentally critical area, such as a wetland or steep slope, can have different restrictions.

Stepped fence panels on a sloping lotA side view of a sloped yard with fence panels that step down the hill so each panel stays level and the average height between posts stays within Seattle's limit.Panels step so average height stays at 6 feet
Original SeattleFence illustration, not a plan of any Seward Park lot. On a sloping site, Seattle allows a fence up to 8 feet if the average height between posts is 6 feet.

Fence styles we build

SeattleFence project photos from the Seattle area. None show a Seward Park home.

Cedar privacy fence

Picture frame cedar

Cedar and hog wire

Our Seward Park installation process

  1. Site visit

    We check access, slope, setbacks, and any park or boulevard edge on your lot.

  2. City rule check

    We match height and placement to Seattle's zoning limits and note if a permit or critical-area review applies.

  3. Written quote

    You get a scope, a site sketch, and material details before work is scheduled.

  4. Install and walkthrough

    Crews build to the agreed plan, backed by our 5-year craftsmanship warranty.

Seward Park fence questions

Do I need a permit to build a fence in Seward Park?

Seattle's SDCI fences page says you don't need a permit for a fence 8 feet high or less that has no masonry or concrete elements over 6 feet. You do need a construction permit if the fence is taller, or if it will be in a flood-prone area. The same 8-foot and 6-foot exemption appears on SDCI's "Do You Need a Permit?" page. Even when no permit is required, the fence still has to meet the zoning height limits.

How tall can a fence be in Seward Park?

In neighborhood residential and multifamily zones, Seattle limits fence height to 6 feet, plus an additional 2 feet of architectural features such as arbors or trellises. In a front or street-side setback the limit is 4 feet. On a sloping site a fence can be 8 feet high if the average height between posts is 6 feet. If a fence sits on a retaining wall that raises the grade, the combined height is capped at 9 feet 6 inches.

Can I put a fence on the park or boulevard line?

Only on your own property. Seattle Parks says city park land includes developed parks, playgrounds, trails, undeveloped greenspaces, and streets designated as park boulevards. A fence on park land is an encroachment. Existing fences and landmarks may not mark the true boundary, and the department asks neighbors not to guess the line by eye. Confirm the property line before you build, especially if your lot sits next to Seward Park or Lake Washington Boulevard.

How much does a fence cost in Seward Park?

It depends on length, style, slope, gates, and access. We don't publish price ranges; we quote each property after looking at it.

Get Your Free Seward Park Fence Quote

Get In Touch

Fill out the form and we'll get back to you shortly.

Type your address. Suggestions help, but a typed address still submits.

By clicking Send Message, you agree to receive calls and text messages from SeattleFence at the number provided, including automated messages, about your inquiry, appointments and fence updates. Consent is not a condition of purchase. Msg frequency varies. Msg & data rates may apply. Reply STOP to opt out or HELP for help. See our Privacy Policy.

Prefer to talk? Call (253) 766-5854

    Fence Installation in Seward Park, Seattle, WA | SeattleFence