Horizon Crest · Bellevue, WA

Horizon Crest Fence Guide: HOA Covenants in Bellevue

Horizon Crest homes sit in the Eaglesmere plats and follow recorded covenants that regulate fences. Here is what those documents say, how the four divisions differ, and how Bellevue's rules fit in.

Not affiliated: SeattleFence is an independent fence contractor. We are not affiliated with, endorsed by, or speaking for the Horizon Crest Community Association. Only the association and the City of Bellevue can decide what is allowed on your lot.

What the association is

The Horizon Crest Community Association serves the Horizon Crest neighborhood in Bellevue, Washington. The City of Bellevue lists it as a registered neighborhood association under Eastgate, and also lists Horizon Crest under Cougar Mountain / Lakemont.

A July 14, 2026 board letter posted on the association's site says the covenants have existed since the neighborhood was built in the late 1970s, are part of the deed and the property plat filed with King County, and apply whether or not an owner has joined the association.

Planning the whole project? See our Horizon Crest fence installation page.

Recorded fence rules

The association's covenants page publishes the protective covenants for four Eaglesmere divisions. The fence language in Divisions 2, 3, and 4 is substantially the same. Division 5 is shorter and different. Confirm which division applies to your lot.

TopicWhat the covenants say
Which covenants applySlightly different recorded covenants for Eaglesmere Divisions 2, 3, 4, and 5
Written approval (Divisions 2–4)No fence may be commenced, erected, or maintained until complete plans are approved in writing by an architectural committee
Height (Divisions 2–4)No fence, wall, hedge, or mass planting higher than 6 ft; side-yard fences that abut a side street max 42 in.
Street setback (Divisions 2–4)No fence closer to a street than the residence setback, except a necessary retaining wall no more than 2 ft above finished grade at the back of the wall
Design (Divisions 2–4)Fences must be well constructed of suitable materials, artistic in design, and not detract from the house or neighboring houses
30-day review (Divisions 2–4)If the committee does not approve or disapprove within 30 days after submission, approval is deemed given for that section
Division 5 differenceNo fence nearer to a street than the building setback line (retaining-wall exception). The same 6 ft and 42 in. limits are not in the published Division 5 text. An NGPE on the rear of lots 4–13 precludes any structure in the easement.
Horizon Crest fence setback and height, Divisions 2, 3, and 4A top-down lot plan. A house sits behind a front setback. Side and rear fence lines are labeled 6 feet. A side-street fence is labeled 42 inches. No fence is shown closer to the street than the house setback.StreetsetbackHouse6 ftrear, up to 6 ft42 in.side street
Original SeattleFence illustration, not a survey of any lot. It summarizes the height and setback rules published for Eaglesmere Divisions 2, 3, and 4. Division 5 is different. Confirm your division and the recorded plat.

How review works today

The covenants page states that the Architectural Control Committee, or Architecture Committee, referred to in the CC&Rs no longer exists, and that all covenant requirements still apply to every home. The association has a Code and Covenant Advisory Committee to help interpret the covenants and city rules.

The July 14, 2026 board letter said the committee had been dormant for a number of years and proposed restarting it. Rules and processes can change. Use the contact options on horizoncrest.org and ask how to submit a fence request now.

Fence styles to consider

The covenants do not publish an approved-style list. These cedar options are SeattleFence planning suggestions, not association-approved designs.

Picture frame cedar

Solid cedar privacy

Horizontal cedar

StyleLookPrivacyPlanning note
Picture frame cedarBoards framed by a top rail and trimHighA finished look from both sides. Still needs review of height, materials, and color under your division's covenants.
Solid cedar privacyVertical cedar boardsHighStraightforward privacy at or under the 6 ft cap in Divisions 2–4. Watch the 42-inch limit on a side-street yard.
Horizontal cedarHorizontal boards, modern linesHighA contemporary look. The covenants require fences to be artistic and not detract from neighboring houses; submit a sample.

Photos show SeattleFence projects elsewhere in the area, not any Horizon Crest home or fence.

Approval timeline

Plan on two separate checks: the Horizon Crest covenants and the City of Bellevue. SeattleFence does not issue either one.

Two separate checks before building a fence in Horizon CrestA diagram showing the Horizon Crest covenant check and the City of Bellevue check as two separate boxes, followed by building.Horizon CrestCovenants andassociation reviewCity of BellevueHeight, setbacks,critical areas, permitBuildOnly after bothchecks are done
Original SeattleFence illustration. One check does not replace the other.
  1. Confirm your Eaglesmere division

    The association's covenants page says the rules differ slightly by division and publishes the text for Divisions 2, 3, 4, and 5. Check your title, plat, and that page before you plan a height or style.

  2. Read the fence and review sections

    In Divisions 2, 3, and 4, focus on the fence-height and setback paragraph and the architectural-control section (written plans, 30-day review). Division 5 has its own fence-setback rule and, on some lots, a Native Growth Protection Easement.

  3. Ask the association how to submit today

    The covenants page says the architectural committee named in the documents no longer exists, but the requirements still apply. A July 2026 board letter proposed restarting that committee. Use the contact options on the association's site; do not start work on an assumption.

  4. Prepare plans and samples

    Divisions 2, 3, and 4 ask for complete plans showing nature, kind, shape, height, materials, and location. Division 4 also requires exterior colors. A SeattleFence quote and sketch can supply those details.

  5. Check Bellevue's rules, then build

    Confirm front-yard setbacks, sight-obstruction limits, and whether the fence is over 8 feet or in a critical area. Build only after you have satisfied both the covenants and the city.

Bellevue's fence rules

Bellevue publishes residential fence rules on its Fences page, based on Land Use Code 20.20.400. Fences in a required front-yard setback may not exceed 4 feet 6 inches, with limited exceptions. The setback is measured from the property line, not the pavement.

You do not need a building permit unless the fence exceeds 8 feet, is in a critical area or critical-area buffer, or is constructed of concrete blocks or similar material. Height is measured from finished grade on the outside of the fence, and on sloping ground the fence must follow or step with the slope. Fences must also respect sight-obstruction rules at intersections and driveways.

Horizon Crest fence-guide questions

Is Horizon Crest a real HOA in Bellevue?

Yes. The Horizon Crest Community Association describes itself as serving the Horizon Crest neighborhood in Bellevue, Washington. The City of Bellevue lists Horizon Crest Community Association as a registered neighborhood association. Recorded protective covenants for the Eaglesmere divisions apply to the homes, whether or not the owner has joined the association. SeattleFence is not affiliated with the association.

Do all Horizon Crest lots use the same covenants?

No. The association's covenants page says the CC&Rs differ slightly depending on which Eaglesmere division your home is in, and it publishes the text for Divisions 2, 3, 4, and 5. Confirm your division before you plan a fence.

Do I need architectural approval to build a fence?

In Eaglesmere Divisions 2, 3, and 4, the recorded covenants say no building, fence, wall, or other structure may be commenced, erected, or maintained until complete plans and specifications — nature, kind, shape, height, materials, and location — have been submitted to and approved in writing by an architectural committee of three members. Division 4 also requires exterior colors. The association's covenants page says that committee no longer exists, but the covenant requirements still apply. Ask the association how to submit a request today.

How tall can a fence be?

In Divisions 2, 3, and 4, no fence, wall, hedge, or mass planting may extend higher than six feet above ground, and fences in side yards that abut a side street may not exceed 42 inches. Division 5 does not publish those same height figures. Bellevue separately limits fences in a required front-yard setback to 4 feet 6 inches, with limited exceptions. Plan to meet both.

How long does review take?

In Divisions 2, 3, and 4, if the architectural committee does not approve or disapprove within 30 days after plans are submitted, approval is not required and that section is deemed complied with. Division 5 has a similar 30-day rule for matters its covenants require. Confirm the current process with the association, because the covenants page says the committee named in the documents no longer exists.

Does Bellevue require a permit?

Bellevue's fences page says you do not need a permit unless the fence exceeds 8 feet, is in a critical area or critical-area buffer, or is constructed of concrete blocks or similar material. Association approval is a separate requirement.

Can SeattleFence get my fence approved?

No. Only the association can speak to its covenant process, and only the City of Bellevue can decide city requirements. SeattleFence can provide a written scope, a site sketch, and height, material, and color details for your request.

Get a quote for your Horizon Crest lot

Tell us the address, your Eaglesmere division if you know it, approximate length, style, target height, and stain color. We will price the fence and give you a written scope and sketch for your association request.

Get Your Free Horizon Crest Fence Quote

Get In Touch

Fill out the form and we'll get back to you shortly.

Type your address. Suggestions help, but a typed address still submits.

By clicking Send Message, you agree to receive calls and text messages from SeattleFence at the number provided, including automated messages, about your inquiry, appointments and fence updates. Consent is not a condition of purchase. Msg frequency varies. Msg & data rates may apply. Reply STOP to opt out or HELP for help. See our Privacy Policy.

Prefer to talk? Call (253) 766-5854

Sources

Every association and city claim on this page comes from one of these public sources. Rules change. Read the current covenants for your division and confirm city rules before you build.

  • Horizon Crest Community Association — home page

    Identifies the Horizon Crest Community Association (HCCA) as serving the Horizon Crest neighborhood in Bellevue, Washington. A July 14, 2026 board letter posted on the site says the covenants have existed since the neighborhood was built in the late 1970s, apply whether or not an owner has joined the association, and are part of the deed and plat filed with King County. The same letter proposed restarting the Architectural Control Committee after it had been dormant. Association news refers to streets including SE 48th Drive and 151st Avenue SE.

  • Horizon Crest Community Association — Codes, Covenants and Restrictions

    Publishes the recorded protective covenants for Eaglesmere Divisions 2, 3, 4, and 5 (King County recording numbers 7610080276 and 7710180079; 7512080659; 7708290320; and 7809130350). States that the CC&Rs apply whether or not an owner has joined the HCCA, that the applicable covenants differ slightly by division, that the Architectural Control Committee referred to in the CC&Rs no longer exists, and that all covenant requirements still apply. Divisions 2–4 require written architectural-committee approval before a fence is started, set a 6-foot maximum height, set a 42-inch limit for side-yard fences that abut a side street, keep fences behind the residence setback line (with a retaining-wall exception), and include a 30-day deemed-approval rule. Division 5 restricts fences nearer to a street than the building setback line and describes a committee with a 30-day written review for matters those covenants require; it also reserves a Native Growth Protection Easement on the rear of lots 4 through 13 that precludes construction of any building or structure in the easement.

  • Horizon Crest Community Association — CC&Rs reminder (July 14, 2026)

    The same July 14, 2026 letter: covenants date from the late 1970s, apply to every home, and the board proposed restarting the Architectural Control Committee.

  • City of Bellevue — Neighborhood Associations

    Lists Horizon Crest Community Association as a registered neighborhood association under Eastgate, and lists Horizon Crest under Cougar Mountain / Lakemont.

  • City of Bellevue — Fences

    Front-yard setback height limit of 4 feet 6 inches and its exceptions; no building permit unless the fence exceeds 8 feet, is in a critical area or buffer, or is built of concrete blocks or similar material; height measured from finished grade on the exterior side; sloping ground must follow or step with the slope; sight-obstruction rules at intersections and driveways.

  • Bellevue Land Use Code 20.20.400 — Fences

    Codified fence height and placement standards referenced by Bellevue's public fences page.